Adjusting Tray Registration
53
4
H Press the {U} or {T} key to set the
registration value (mm).
I Press the {U} or {T} key to set the
digit of the registration value
(mm).
Increase the value to shift the print
area in the positive direction, and
decrease to shift in the negative di-
rection.
Note
❒ Pressing the {U} or {T} key
makes the value increase or de-
crease by 1.0 mm steps.
J Press the {# Enter} key.
K Press the {Escape} key.
The display returns to the print
area [Adjustment] menu.
L Print the test sheet to confirm the
adjustment result.
M Press the {Online} key.
The initial screen appears.
Horiz: Tray 2:
(-4.0 +4.0) 0.0
Registration:
Adjustment
TS3X001N
KirP4GB_Mainte-F5_FM_forPaper.book Page 53 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
