Making Printer Settings Using the Control Panel
160
When you use a parallel or USB connection, the print job is canceled if binary
data is sent from the printer driver.
When you use an Ethernet connection, the print job is canceled if:
• The printer driver data format is TBCP and the data format selected using
the control panel is Binary Data.
• The printer driver data format is binary and the data format selected using
the control panel is TBCP.
❒ Default: Binary Data
❖ Resolution
You can select the resolution.
• 300 dpi
• 600 dpi
• 1200 dpi
❒ Default: 600 dpi
To Next Page
Loading...
