S
ETTING
U
P
Y
OUR
P
RINTER
2.29
2
6
Select the components to be installed and click
Next
. After
selecting the components, the following window appears. You can
also change the printer name, set the printer to be shared on the
network, set the printer as the default printer, and change the port
name of each printer. Click
Next
.
To install this software on a server, select the
Setting up this
printer on a server
checkbox.
7
After the installation is finished, a window appears asking
you to print a test page. If you so desire, select the
corresponding check box and Click
Finish
.
N
OTE
: After setup is complete, if your printer driver doesn’t work
properly, reinstall the printer driver. See “Reinstalling Printer Software”
on page 2.30.
To Next Page
Loading...
