Adjusting the Printer
82
H Press the {# Enter} key.
I When automatic color adjustment is complete, the confirmation mes-
sage about printing a test sheet appears. Wait for the following message
to appear, and then click the {# Enter} key.
J The following message appears:
Make sure the paper size set in step
H
appears, and then press the {# Enter}
key.
The Fuser Adjust Sheet is printed. For test sheet samples, see p.83 “
Test
Sheet Samples”.
❒ In this example, thick A4 paper is loaded in the bypass tray.
K Compare the color adjustment sheet sample with the framed white part
of the printed pattern. If sample and printed pattern are almost the same,
select “0”. Otherwise, select one of the following values according to
the position of the color in the sample:
Color at center: 0
Color shifted to left: -1
Color shifted to right: +1
When you select “ 0 ”, the printer returns to the previous menu.
Adjusting...
Press # for Test
Print (Bypass)
Set Sheet, then#
A4 (297 x 210)
Select Action:
0: Exit
Select Action:
-1: Re-adjust
Select Action:
+1: Re-adjust
To Next Page
Loading...
