2
Set paper for cover sheets in the
bypass feed table.
Make sure to set paper that is
identical in size and direction with
the paper to which you are copy-
ing (step 3).
3
Select copy paper using the
Pa-
per Selection
key.
S
You cannot select the large capacity
tray.
4
.
Set your originals in the optional
document feeder.
See page
32.
5
.
Press the
Start
key.
Copying The Front And Back Covers Of The Originals
Note: This function can be used only when your copier is equipped with the op-
tional document feeder.
Note: You can select this setting with the user tools. (
See page 126.) If you do
not select this setting, only the first page of the originals is copied. (
See
page 59.)
S
Regarding functions that cannot be used together with this function,
see page
86.
f-eu-5
ADDING OR INSERTING SHEETS (Cover/Slip Sheet )
60
To Next Page
Loading...
