Adding A Front Cover Sheet (Blank Cover)
Note: This function can be used only when your copier is equipped with the op-
tional document feeder.
Note: The copier can also add the back cover. Set the copier with the user tools.
(
See page 126.) If you do,
see page 63.
S
Regarding functions that cannot be used together with this function,
see page
86.
1
Press the
Cover/Slip Sheet
key
to light the
Blank Cover
indica-
tor.
2
Set paper for cover sheets in the
bypass feed table.
Make sure to set paper that is
identical in size and direction with
the paper to which you are copy-
ing (step 3).
3
Select copy paper using the
Pa-
per Selection
key.
S
You cannot select the large capacity
tray.
f-eu-5
1
2
mm
i10Key { j
ADDING OR INSERTING SHEETS (Cover/Slip Sheet )
62
To Next Page
Loading...
