Copier’s condition Action
is lit.
You’ve selected an improper paper size. Copying is
impossible. Select the proper paper size.
When making two-sided copies:
¯
You cannot use the bypass feed table. Close the
bypass feed table and select another paper tray.
¯
Improper paper size is selected. Select the proper
paper size.
See page 73.
¯
You cannot change the paper size when copying
the back side after copying the front side.
¯
You cannot select Cover/Slip Sheet mode.
When making 2 one-sided copies from 2 facing pages
(Book Original mode):
¯
You cannot select the lengthwise copy paper for
the book originals. Select sideways copy paper.
¯
You cannot select Auto Reduce/Enlarge.
¯
You cannot select Cover mode.
¯
You cannot select Auto Paper Select.
When adding cover or slip sheets (Cover/Slip Sheet
mode):
¯
The bypass feed table is closed. Open it to set
cover sheets in Cover mode or OHP transparencies
in OHP Slip Sheet mode.
(In OHP Slip Sheet mode, OHP transparencies
should be set in the bypass feed table. Slip sheets
should be set in a paper tray.)
¯
You cannot use Single Copies function. (However,
you can use the OHP Slip Sheet and Single Copies
from Book Originals functions together.)
¯
You cannot make two-sided copies.
f-eu-6
IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
92
To Next Page
Loading...
