Ricoh Aficio G7500 - USB Connection Is Not Automatically Detected

Software Cannot Be Installed
37
5
USB Connection is not Automatically Detected
If the USB connection is not automatically detected, do the following:
1 Run [Quick Install for USB].
When [Quick Install for USB] is complete, go to Step 3.
2 Delete the printer driver.
3 Delete the device.
4 Run [Quick Install for USB] again.
z
For details about [Quick Install for USB], see “Quick Install for USB”, Quick Installation Guide .
z
For details about deleting the device, see P.41 "Deleting Devices".
z
For details about deleting the printer driver, see P.39 "Uninstalling the Printer Driver".
If these steps do not solve the problem, contact your sales or service representative.