Troubleshooting > Printer Status Monitor Errors > No Response from Printer
No Response from Printer
Follow the procedure below to check the port settings and the connection between the printer and computer.
1. Check that the power of the printer is on.
2. Make sure that the computer and printer are properly connected using a USB cable.
3. Open the printer properties dialog box.
4. Click the [Ports] tab.
5. Check that USB is selected in the [Print to the following port:] list.
❍ Under Windows 98/Me, check that USB is selected in the list on the [Details] tab.
● Opening from the Start Menu
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/t0008.htm2005/10/05 12:08:31
To Next Page
Loading...
