Control Panel
19
1
34. Quick Dial Flip Plate
Flip the plate downward to change from
{Quick Dial 01} key to {Quick Dial 16} key.
Flip the plate upward to change from
{Quick Dial 17} key to {Quick Dial 32} key.
35. {Immediate Trans./Memory Trans.}
key (facsimile mode)
Press to toggle between Memory Trans-
mission (Memory Trans.) and Immediate
Transmission (Immediate Trans.) modes.
See “Memory Transmission”, Facsimile
Reference.
36. {Resolution} key (facsimile
mode)
Press to specify the resolution of the fax.
See “Resolution”, Facsimile Reference.
37. User Function keys (facsimile
mode)
You can assign frequently-used functions
to these keys. See “General Settings/Ad-
just”, General Settings Guide.
By default, the following functions are
registered:
{F1} key: Start Manual Reception
{F2} key: Switch RX Mode
{F3} key: Transmission Stamp
Reference
p.20 “Display”
p.25 “Turning On the Power”
p.29 “Entering Text”
“Accessing User Tools”, General Settings Guide
“General Settings/Adjust”, General Settings Guide
“Clearing Misfeeds”, Troubleshooting
“Original Type Setting”, Copy Reference
“Sort”, Copy Reference
“Duplex (Type 2 only)”, Copy Reference
“One-Sided Combine”, Copy Reference
“Two-Sided Combine (Type 2 only)”, Copy Reference
“On Hook Dial”, Facsimile Reference
“Substitute Reception”, Facsimile Reference
“Entering a pause”, Facsimile Reference
“Redial”, Facsimile Reference
“Original Type”, Facsimile Reference
“Memory Transmission”, Facsimile Reference
“Resolution”, Facsimile Reference
“Selecting Original Type”, Scanner Reference
Printer Reference
Network Guide
To Next Page
Loading...
