Placing Originals
19
1
C Select [Original Size] using {U} or {T}, and then press the {OK} key.
D Select [Regular Size] using {U} or {T}, and then press the {OK} key.
When [Auto Detect] is selected, the size of the placed original will be detected
automatically.
E Select the original size using the scroll keys, and then press the {OK} key.
The “
Programmed” message appears.
When the regular size originals settings are registered, appears
on the top of the copy display.
Note
❒ This function is not available in Auto Paper Select mode.
❒ To cancel the size you have set, press the {Clear Modes} key.
To Next Page
Loading...
