You can change the stamp position, pages to be stamped, and numbering.
5. After making all settings, press [OK].
6. Press [OK].
• You can change the settings for Page Numbering under Stamp in User Tools. For details about
Stamp, see “Stamp”.
•
You can change the stamp position if Combine or Duplex is specified for use with this function
under Duplex Back Page Stamping Position or Page Numbering in Combine in User Tools. For
details about these settings, see “Stamp”.
• When Page Numbering is used with Combine, Magazine, or Booklet function, page numbers are
printed as follows:
• Per Original is selected in Page Numbering in Combine:
With 1 Sided/2 Sided using the Combine function
With the Magazine or Booklet function
• Per Copy is selected in Page Numbering in Combine:
With 1 Sided/2 Sided using the Combine function
• If you combine this function with the Duplex (Top to Top) function and select [P1,P2...] or
[1/5,2/5...], page numbers on the back are printed as follows:
3. Advanced Copying
138
To Next Page
Loading...
