Monitoring and Configuring the Printer
96
2
Note
❒ For details about UNIX commands, see UNIX Supplement.
❒ Check the error contents that may be printed in the configuration page. For
details about printing a configuration page, see Printer Reference.
Printer configuration
You can check the printer configuration using telnet.
This section explains the checking procedure for input/output tray and printer
language.
• UNIX: Use the "info" command and "rsh", "rcp", “ftp”, and "sftp" parameters.
• mshell: Use the "info" command.
❖ Input Tray
Skipped due to Error Skipped the error.
Storage Complete The storage is complete.
Storage Failed The storage has failed.
Supplies Order Call failed The supply order call has failed.
Transmission Aborted The transmission was interrupted.
Transmission Complete The transmission completion was completed.
Transmission Failed The transmission has failed.
Tray Error: Chaptering The paper feed tray specification error has occurred
because chaptering as well as the normal paper use
the same tray for printing.
Tray Error: Duplex Printing Selected paper tray cannot be used for duplex print-
ing.
Unit Left Open: ADF Document feeder is opened.
Waiting for Job Suspension The machine is waiting for Job Suspension.
Warming Up... The machine is warming up.
Item Description
No. ID number of the paper tray
Name Name of the paper tray
PaperSize Size of paper loaded in the paper tray
Status Current status of the paper tray
•Normal: Normal
• NoInputTray: No tray
• PaperEnd: No paper
Messages Description
To Next Page
Loading...
