Monitoring and Configuring the Printer
34
2
❖ Administrator Mode
In the administrator mode, you can configure various machine settings.
1. Home
The [Status], [Device Info], and [Counter]
tab are displayed. Details of the tab
menu are displayed on the work area.
2. Job
Display all print files.
3. Address Book
User information can be registered,
displayed, changed, and deleted.
4. Configuration
Make system settings for the machine,
interface settings, and security.
5. Reset Device
Click to reset the printer. If a print job
is being processed, the printer will be
reset after the print job is completed.
This button is located on Top Page.
6. Reset Printer Job
Click to reset current print jobs and
print jobs in queue. This button is lo-
cated on Top Page.
Access in the Administrator Mode
Follow the procedure below to access Web Image Monitor in the administrator
mode.
A On Top Page, click [Login].
The window for entering the login user name and password appears.
B Enter your login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
ASC008S
To Next Page
Loading...
