Monitoring and Configuring the Printer
38
2
Changing the Network Interface Board Configuration
Follow the procedure below to change the network interface board configura-
tion using SmartDeviceMonitor for Admin.
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C In the list, select a machine whose configuration you want to change.
D On the [Tools] menu, click [NIB Setup Tool].
NIB Setup Tool starts when the network interface board is default.
E Click [Web browser], and then click [OK].
A Web browser opens and the window for entering the login user name and
password for the Web Image Monitor administrator appears.
F Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
G Configure settings using Web Image Monitor.
H Click [Logout].
I Quit Web Image Monitor.
J Quit SmartDeviceMonitor for Admin.
Reference
p.29 “Using Web Image Monitor”
To Next Page
Loading...
