Monitoring and Configuring the Printer
40
2
Changing the Paper Type
Follow the procedure below to change the paper type.
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C In the list, select a machine whose configuration you want to change.
D On the [Tools] menu, point to [Device Settings], and then click [Paper].
A Web browser opens and the window for entering the login user name and
password for the Web Image Monitor administrator appears.
E Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
The [Paper] page appears.
F Select a paper type in the [Paper Type] list for each tray.
Enter required setting items.
G Click [OK].
H Click [Logout].
I Quit Web Image Monitor.
J Quit SmartDeviceMonitor for Admin.
Note
❒ For details about setting items, see Help in the [Device Settings] on [Configu-
ration] page.
To Next Page
Loading...
