Monitoring and Configuring the Printer
48
2
Managing Address Information
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C Select a machine in the list, and then click [Address Management Tool]on the
[Tools] menu.
The dialog box for entering the login user name and password appears.
D Enter the login user name and password, and then click [OK].
Address Management Tool starts.
For details about the login user name and password, consult your network
administrator.
Note
❒ For details, see Address Management Tool Help.
To Next Page
Loading...
