Ricoh Aficio MP 2500 - Tray Paper Settings

Tray Paper Settings
43
2
Tray Paper Settings
This section describes the User Tools in the Tray Paper Settings menu under Sys-
tem Settings.
Default settings are shown in bold type.
Important
❒ If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.
❖ Paper Size:Tray 1-4
Select the size of the paper loaded in the paper tray.
• The paper sizes you can set for Tray 1, 3, and 4 are as follows:
Auto Detect, A3L, A4K, A4L, A5K, A5L, A6L, B4 JISL, B5 JISK,
B5 JISL, B6 JISL, 11"×17"L, 8
1
/
2
"×14"L, 8
1
/
2
"×13"L, 8
1
/
2
"×11"K,
8
1
/
2
"×11"L, 8
1
/
4
"×14"L, 8
1
/
4
"×13"L, 8"×13"L, 7
1
/
4
"×10
1
/
2
"K,
7
1
/
4
"×10
1
/
2
"L, 5
1
/
2
"×8
1
/
2
"L, 8KL, 16KK, 16KL, Custom Size
The default setting is Auto Detect.
• Custom size paper set for Tray Paper Size: Tray1,3 and 4 will be as follows:
Vertical: 100.0 to 297.0 mm (3.94 to 11.69 inch), Horizontal: 148.0 to 432.0
mm (5.83 to 17.00 inch)
• The paper sizes you can set for Tray 2 are as follows:
Auto Detect, A3L, A4K, A4L, A5K, A5L, A6L, B4 JISL, B5 JISK,
B5 JISL, B6 JISL, C5 EnvL, C6 EnvL, DL EnvL, 11"×17"L, 8
1
/
2
"×14"L,
8
1
/
2
"×13"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 8
1
/
4
"×14"L, 8
1
/
4
"×13"L, 8"×13"L,
7
1
/
4
"×10
1
/
2
"K, 7
1
/
4
"×10
1
/
2
"L, 5
1
/
2
"×8
1
/
2
"L, 4
1
/
8
"×9
1
/
2
"L, 3
7
/
8
"×7
1
/
2
"L,
8KL, 16KK, 16KL, Custom Size
The default setting is Auto Detect.
• Custom size paper set for Tray Paper Size: Tray2 will be as follows:
Vertical: 100.0 to 297.0 mm (3.94 to 11.69 inch), Horizontal: 148.0 to 432.0
mm (5.83 to 17.00 inch)
❖ Printer Bypass Paper Size
Specify the size of the paper in the bypass tray when using the printer func-
tion. You can select paper size from Custom size or Regular size.
• The paper sizes you can set for bypass tray are as follows:
Auto Detect, A3L, A4K, A4L, A5K, A5L, A6L, B4 JISL, B5 JISK,
B5 JISL, B6 JISL, C5 EnvL, C6 EnvL, DL EnvL, 11"×17"L, 8
1
/
2
"×14"L,
8
1
/
2
"×13"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 8
1
/
4
"×14"L, 8
1
/
4
"×13"L, 8"×13"L,
7
1
/
4
"×10
1
/
2
"K, 7
1
/
4
"×10
1
/
2
"L, 5
1
/
2
"×8
1
/
2
"L, 4
1
/
8
"×9
1
/
2
"L, 3
7
/
8
"×7
1
/
2
"L,
8KL, 16KK, 16KL, Custom Size
You can specify a custom size as follows:
90.0 to 297.0 mm (3.55 to 11.69 inch) vertically, and 148.0 to 600.0 mm (5.83
to 23.62 inch) horizontally.
The default setting is Auto Detect.