Administrator Tools
63
2
G Press the {OK} key after setting each item.
For details about specifying the settings, see "Programming the LDAP Server".
H Press [Exit].
I Press the {User Tools/Counter} key.
Reference
p.64 “Programming the LDAP Server”
Deleting the programmed LDAP server
A Select [System Settings] using {U} or {T}, and then press the {OK} key.
B Select [Administrator Tools] using {U} or {T}, and then press the {OK} key.
C Select [Prog/Chnge/Del LDAP Server] using {U} or {T}, and then press the {OK}
key.
D Select [Delete] using {U} or {T}, and then press the {OK} key.
E Select the LDAP server you want to delete using {U} or {T}, and then press
the {OK} key.
F Press [Yes].
G Press the {User Tools/Counter} key.
To Next Page
Loading...
