Troubleshooting When Using the Copy Function
16
2
Black spots appear on the
copy of a photographic print.
Because of high humidity, the
photographic print has stuck
to the exposure glass.
Place the print on the expo-
sure glass in either of the fol-
lowing ways:
• Place an OHP transparency
on the exposure glass, and
then place the print on top
of the OHP transparency.
• Place the print on the ex-
posure glass, and then
place two or three sheets of
white paper on top of it.
Leave the exposure glass
cover or ARDF open when
copying.
Problem Causes Solutions
To Next Page
Loading...
