Adding Paper, Toner and Staples
94
7
G Square the paper and place it in the tray.
Do not stack paper over the limit mark.
H While pressing the release lever, push in the side and end fences until they
are flush against the paper's edges.
I Press down the lock button.
J Push the paper tray in until it stops.
Note
❒ When setting small quantities of copy paper, be careful not to squeeze in
the side fence too much. Paper might not feed in properly if the side fences
are too tight against the paper's edges.
❒ Be sure to set the correct size, otherwise a paper jam might occur.
AYP002S
AYP005S
BAK010S
To Next Page
Loading...
