Placing Originals
19
1
E Select the original size using the scroll keys, and then press the {OK} key.
The “
Programmed” message appears.
When the regular size originals settings are registered, appears
on the top of the copy display.
Note
❒ This function is not available in Auto Paper Select mode.
❒ To cancel the size you have set, press the {Clear Modes} key.
Custom sizes
When placing custom size originals on the exposure glass or in the ARDF, spec-
ify the size of the originals using the number keys.
Important
❒ Originals that have a vertical length of 105–297 mm (4.2"-11.6") and a horizon-
tal length of 128-1,260 mm (5.1"-49.6") can be specified.
A Select [Byp.] using {U} or {T}.
B Press the {q} key.
C Select [Original Size] using {U} or {T}, and then press the {OK} key.
To Next Page
Loading...
