Copying
60
2
D Select the duplex orientation using {U} or {T}, and then press the {OK}
key.
The “
Programmed” message appears.
E Select the paper size using {U} or {T}.
F Place the originals, and then press the {Start} key.
Note
❒ To cancel the Two-Sided Combine function in step
A
, press the {Com-
bine/Series} key again. Make sure the indicator goes off.
❒ To display the screens in steps
C
and
D
, select [Always Specify] for [Orienta-
tion] with Copier Features in User Tools. If [Do not Specify] is selected, pro-
ceed to step
E
.
Reference
“Copier Features: Orientation”, General Settings Guide
To Next Page
Loading...
