Special Senders to Treat Differently
141
4
Print 2 Sided
This section describes how to specify Print 2 Sided.
Specify when programming a Special Sender.
A Select [Print 2 Sided].
B Press [On] or [Off], and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for "2
Sided Print" of "Reception Settings". See "Reception Settings".
Reference
p.97 “Reception Settings”
Memory Lock
This section describes how to specify Memory Lock.
Specify when programming a Special Sender.
A Select [Memory Lock].
B Press [On] or [Off], and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for
“Program Memory Lock ID" under "Administrator Tools". See "Adminis-
trator Tools".
Reference
p.105 “Administrator Tools”
Paper Tray
This section describes how to specify Paper Tray.
Specify when programming a Special Sender.
A Select [Paper Tray].
B Select the tray you want to use, and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for
“Paper Tray" of "Reception Settings". See "Reception Settings".
Reference
p.97 “Reception Settings”
To Next Page
Loading...
