Erase Border Width
Specify the width of erased border margins using this function.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).
Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1" boundary margin around all four
edges of each original.
The default setting is On.
Erase Center Width
Specify the width of the erased center margins with this function.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).
Front Cover Copy in Combine
You can make a combined copy on the front cover sheet when you select Front Cover mode.
The default setting is Combine.
Copy Order in Combine
You can set the copy order in Combine mode to Left to Right or Top to Bottom.
The default setting is From Left to Right.
Orientation: Booklet, Magazine
You can select the opening orientation of copies when using Booklet or Magazine mode.
The default setting is Open to Left.
3. Copier/Document Server Features
110
To Next Page
Loading...
Need help?
General
