2. Press [System Settings].
3. Press the [Tray Paper Settings] tab.
4. Press [ Next] to scroll through the list.
5. Press [Paper Type: Bypass Tray].
6. Select the proper items, according to the paper type you want to set.
Press [OHP (Transparency)] on the [Paper Type] area when loading OHP transparencies.
7. Press [OK].
The paper type selected is displayed.
8. Press the [User Tools/Counter] key.
The initial screen appears.
• Printing on special paper such as thick paper, thin paper, or OHP transparencies may be slower than
printing on plain paper.
• The settings made will remain valid until they are reset again. After printing on OHP transparencies
or thick paper, thin paper, make sure to clear settings for the next user.
• For details about setting printer drivers, see the printer driver Help.
22
To Next Page
Loading...
