Fax Destination
203
7
J Press [OK].
Note
❒ When a group is registered, you can also add this fax destination to the
group. For details about registering groups, see "Registering Names to a
Group".
❒ To register the name, see "Registering Names".
Reference
p.188 “Registering Names”
p.203 “Using a Fax Destination as a sender”
p.203 “Selecting the line”
p.204 “Programming the SUB Code”
p.204 “Programming the SEP Code”
p.204 “Setting the International TX Mode”
p.204 “Selecting the Fax Header”
p.235 “Registering Names to a Group”
p.205 “Setting label insertion”
Using a Fax Destination as a sender
This section describes how to use fax destination as a sender.
A Press [Protection].
B Press [Sender] on the right side of Use Name as.
Selecting the line
This section describes how to select the line.
A Press [Select Line].
B Select the line, and then press [OK].
To Next Page
Loading...
