SP5xxx: Mode
SM 5-81 D017/D018/D019/D020
Service
Tables
1
Access Permissible Number
Sets a limit on access attempts when an excessive number of attempts are
detected for MFP features.
[0 to 500/100/1]
2
Attack Detect Time
Sets the length of time for monitoring the frequency of access to MFP
features.
[10 to 30/10/1 sec.]
3
Productivity Fall Waite
Sets the wait time to slow down the speed of certification when an excessive
number of access attempts have been detected.
[0 to 9/3/1 sec.]
4
Attack Max Number
Sets a limit on the number of requests received for certification in order to
slow down the certification speed when an excessive number of access
attempts have been detected.
[50 to 200/200/1 attempt]
5420 User Authentication
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has
been enabled.
1 Copy
Determines whether certification is required before a user can use the copy
applications.
[0 to 1/0/1]
0: On
1: Off
11
Document Server
Determines whether certification is required before a user can use the
document server.
To Next Page
Loading...
