SP5xxx: Mode
D017/D018/D019/D020 5-98 SM
the 128th character are ignored.
This address is customer information and is not printed in the SMC report.
HTTP Proxy Port
064
This SP sets the port number of the proxy server used for communication
between embedded RCG-N and the gateway. This setting is necessary to
set up embedded RCG-N.
Note: This port number is customer information and is not printed in the
SMC report.
HTTP Proxy Aut Usr
065
This SP sets the HTTP proxy certification user name.
Note:
The length of the name is limited to 31 characters. Any character
beyond the 31st character is ignored.
This name is customer information and is not printed in the SMC report.
HTTP Proxy Aut Pass
066
This SP sets the HTTP proxy certification password.
The length of the name is limited to 31 characters. Any character
beyond the 31st character is ignored.
This name is customer information and is not printed in the SMC report.
CERT: Up State
Displays the status of the certification update.
0 The certification used by Cumin is set correctly.
1
The certification request (setAuthKey) for update has been
received from the GW URL and certification is presently being
updated.
2
The certification update is completed and the GW URL is being
notified of the successful update.
67
3
The certification update failed, and the GW URL is being notified of
the failed update.
To Next Page
Loading...
