SP5xxx: Mode
SM 5-99 D017/D018/D019/D020
Service
Tables
4
The period of the certification has expired and new request for an
update is being sent to the GW URL.
11
A rescue update for certification has been issued and a rescue
certification setting is in progress for the rescue GW connection.
12
The rescue certification setting is completed and the GW URL is
being notified of the certification update request.
13
The notification of the request for certification update has
completed successfully, and the system is waiting for the
certification update request from the rescue GW URL.
14
The notification of the certification request has been received from
the rescue GW controller, and the certification is being stored.
15
The certification has been stored, and the GW URL is being notified
of the successful completion of this event.
16
The storing of the certification has failed, and the GW URL is being
notified of the failure of this event.
17
The certification update request has been received from the GW
URL, the GW URL was notified of the results of the update after it
was completed, but an certification error has been received, and
the rescue certification is being recorded.
18
The rescue certification of No. 17 has been recorded, and the GW
URL is being notified of the failure of the certification update.
CERT: Error
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
1
Request for certification update in progress. The current
certification has expired.
68
2
An SSL error notification has been issued. Issued after the
certification has expired.
To Next Page
Loading...
