1. Press [Change] under Stamp Position.
2. Select the stamp position, and then press [OK].
Registering a user stamp
Scans an image that is used as a user stamp.
The size range for stamp images is 10 297 mm (0.4 11.7 inches) high and 10 432 mm (0.4 17.0
inches) wide. However, if the stamp's size exceeds the maximum value of the area (5,000 mm
2
, 7.75
inch
2
), it will be automatically corrected to a size that is within the range of the area.
Up to four frequently used images can be stored in memory.
1. Base point
2. Exposure glass
1. Press the [User Tools/Counter] key.
3. Advanced Copying
130
3
To Next Page
Loading...
