original original
1. Erased part
2.
2
99 mm (0.1 3.9 inches)
•
The erase width is set to 10 mm (0.4 inches) as a default. You can change this setting under Edit in
User Tools. For details about Edit, see “Edit”.
• The width of the erased margin varies depending on the reproduction ratio.
• p.207 "Edit"
Erase Border (same width)
Erases the edge margin of the original image.
1. Press [Edit / Stamp].
2. Press [Erase].
3. Press [Erase Centre / Border].
4. Press [Erase Border].
5. Press [Same Width].
3. Advanced Copying
146
To Next Page
Loading...
