Ricoh Aficio MP 3352 - Page 222

Orientation-fixed (top to bottom) or two-sided paper might not be printed correctly depending on
how the originals and paper are placed.
Staple Position
Specify which staple type has priority to be shown on the initial display.
•
When the internal finisher is installed:
Default for “Staple Position 1”: [Staple: Top 1]
Default for “Staple Position 2”: [Staple: Bottom 1]
Default for “Staple Position 3”: [Staple: Left 2]
Default for “Staple Position 4”: [Staple: Top 2]
• When the 500-sheet finisher is installed:
Default for “Staple Position 1”: [Staple: Slant]
Default for “Staple Position 2”: [Staple: Bottom Slant]
Default for “Staple Position 3”: [Staple: Left 2]
Default for “Staple Position 4”: [Staple: Top 2]
• When the 1000-sheet finisher is installed:
Default for “Staple Position 1”: [Staple: Top 1]
Default for “Staple Position 2”: [Staple: Bottom 1]
Default for “Staple Position 3”: [Staple: Left 2]
Default for “Staple Position 4”: [Staple: Top 2]
• When the booklet finisher is installed:
Default for “Staple Position 1”: [Staple: Top 1]
Default for “Staple Position 2”: [Staple: Centre]
Default for “Staple Position 3”: [Staple: Left 2]
Default for “Staple Position 4”: [Staple: Top 2]
Punch Type
Specify which punch type has priority to be shown on the initial display.
(mainly Europe and Asia)
Default for “Punch Type 1”: [Punch: 2 Holes Left]
Default for “Punch Type 2”: [Punch: 2 Holes Top]
(mainly North America)
Default for “Punch Type 1”: [Punch: 3 Holes Left]
Default for “Punch Type 2”: [Punch: 3 Holes Top]
5. Copier and Document Server Features
220
5