6. Press [Program].
The confirmation screen appears.
7. Press [Exit].
8. Press [OK] twice.
• To change the value you entered, press the item you want to change, and then enter a new value.
•
You can specify only one custom size.
Recalling the registered custom size
Recalls the registered paper size.
1. Press [Bypass], and then press the [ ] key.
2. Press [Paper Size].
3. Press [Custom Size].
4. Press [Recall].
The registered size is displayed.
5. Press [OK] twice.
Copying from the Bypass Tray
49
To Next Page
Loading...
