When the 1000-sheet finisher is attached:
When the booklet finisher is attached:
3. Press [OK].
4. Enter the number of copy sets using the number keys.
5. Place the originals.
To confirm the type of finishing, press the [Sample Copy] key.
6. Press the [Start] key.
• If you are copying from the exposure glass, a single copy of each original is made first. If the first
copy set is acceptable, you can make the remaining copy sets by pressing the [ ] key. The time
required for copy sets to be delivered varies depending on the print settings.
2. Basic Copying
76
To Next Page
Loading...
