Connecting the Machine
18
1
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Effective].
❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒ SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒ When POP before SMTP is set to [On], you must also make settings for Recep-
tion Protocol and POP3 / IMAP4 Settings.
❒ When SMTP Authentication is set to [On], you must also make settings forAd-
ministrator's E-mail Address.
❒ E-mail Communication Port and Fax E-mail Account must be specified in or-
der to receive Internet Fax.
❒ When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
p.49 “Interface Settings”
p.55 “File Transfer”
File Transfer Program / Change / Delete E-mail
Message
As required
File Transfer Program / Change / Delete Subject As required
File Transfer Fax E-mail Account Necessary
Menu User Tool Setting Requirements
To Next Page
Loading...
