Monitoring and Configuring the Printer
48
2
Configuring the Energy Saver
Mode
Follow the procedure below to con-
figure Energy Saver mode.
A
Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to
[Yes], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the select-
ed protocol appears.
Select the protocol of the machine
whose configuration you want to
change.
If you are using TCP/IP SNMP v3,
enter the user authentication.
C Select the machine whose set-
tings you want to make.
To make settings for all machines
in the selected group, select no ma-
chine.
D On the [Group:] menu, point to [En-
ergy Saver Mode], point to [Set Indi-
vidually] to make the settings for
only the selected machine or
point to [Set By Group] to make the
settings for all machines in the se-
lected group, and then click [On]
or [Off].
E
Quit SmartDeviceMonitor for Admin.
Note
❒ For details about the setting for
Energy Saver mode, see Smart-
DeviceMonitor for Admin
Help.
Setting a Password
Follow the procedure below to set a
password.
A
Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the select-
ed protocol appears.
Select the protocol of the machine
whose configuration you want to
change.
If you are using TCP/IP SNMP v3,
enter the user authentication.
C In the list, select a machine whose
configuration you want to
change.
D On the [Tools] menu, click [NIB Set-
up Tool].
A Web browser opens and the dia-
log box for entering the login user
name and password for the Web
Image Monitor administrator ap-
pears.
NIB Setup Tool starts when the net-
work interface board is default. Fol-
low the instructions on the screen.
E Enter the login user name and
password, and then click [Login].
For details about the user name
and password, consult your net-
work administrator.
F Click [Configuration].
G Click [Program / Change Administra-
tor] on the [Device Settings] area,
and then change the settings.
H Quit Web Image Monitor.
I
Quit SmartDeviceMonitor for Admin.
To Next Page
Loading...
Need help?
General
