Ricoh Aficio MP 7001 - Finisher SR4050

3. Reinstall the punch waste box.
BQM004S
4. Close the finisher front cover.
"Hole Punch Receptacle is full." disappears.
Finisher SR4050
The following procedure describes how to remove punch waste from the Finisher SR4050.
• While "Hole Punch Receptacle is full." is displayed, you cannot use the Punch function.
• "Hole Punch Receptacle is full." is displayed until the punch waste box is reinstalled.
• If the message is still displayed, reinstall the punch waste box.
1. Open the finisher front cover.
BQN023S
6. Clearing Misfeeds
142
6