Ricoh Aficio MP 7001 - When Z-Folded Paper Is Not Properly Aligned; Finisher SR4040; Finisher SR4050

When Z-folded Paper Is Not Properly Aligned
Install the auxiliary Z-fold support tray if Z-folded prints are not output tidily.
Finisher SR4040
Use the following procedure to attach the Z-fold support tray for the Finisher SR4040 to the Finisher Shift
Tray or Finisher Upper Tray.
1. Remove the prints.
2. Attach the Z-fold support tray to the finisher upper tray or finisher shift tray.
Finisher Upper Tray:
BAS012S
Finisher Shift Tray:
BQM025S
Finisher SR4050
Use the following procedure to attach the Z-fold support tray for the Finisher SR4050 to the Finisher Shift
Tray or Finisher Upper Tray.
7. Appendix
148
7