Ricoh Aficio MP 7001 - Multi-Folding Unit

Multi-Folding Unit
Use the following procedure to attach the Z-fold support tray for the Multi-Folding Unit to the Multi-Folding
Unit Tray.
1. Open the front cover of the Multi-Folding Unit and take out the Z-fold support tray for Multi-
Folding Unit (located at the bottom of the Multi-Folding Unit).
BQL071S
2. Set the Z-fold support tray for Multi-Folding Unit in the slope of the Multi-Folding Unit Tray
so that it is flush against the end fence.
BQL072S
3. Close the front cover of Multi-Folding Unit.
• When you have finished using the Z-fold support tray for Multi-Folding Unit, open the front cover of
the Multi-Folding Unit and re-attach the tray to its stowage hook.
7. Appendix
150
7