System Service Mode
D037/D038/D040/D041 9-180 SM Appendix
[0 to 16383 / 0 / 1 digit/step]
002
Factory Setting: BO
Color
*ENG
Displays the factory setting values of the
black level adjustment (rough adjustment)
for the odd blue signal in the CCD circuit
board (color printing speed).
[0 to 16383 / 0 / 1 digit/step]
[Analog Gain Adjust]
4677
Displays the factory setting values of the gain adjustment for Red.
001 Factory Setting: RE Color *ENG
[0 to 7 / 0 / 1 digit/step]
[Analog Gain Adjust]
4678
Displays the factory setting values of the gain adjustment for Green.
001 Factory Setting: GE Color *ENG
[0 to 7 / 0 / 1 digit/step]
[Analog Gain Adjust]
4679
Displays the factory setting values of the gain adjustment for Blue.
001 Factory Setting: BE Color *ENG
[0 to 7 / 0 / 1 digit/step]
[Digital Gain Adjust]
4680
Displays the gain value of the amplifiers on the controller for Red.
001 Latest: RE Color *ENG
002 Latest: RO Color *ENG
[0 to 1023 / 0 / 1 digit/step]
[Digital Gain Adjust]
4681
Displays the gain value of the amplifiers on the controller for Green.
To Next Page
Loading...
Need help?
General
