Fax Destination
227
7
To program the SUB Code
A Press [Adv. Features], and then press [SUB Code].
B Press [Change] under TX SUB Code.
C Enter the SUB Code, and then press [OK].
D To enter a password, press [Change] under Password (SID).
E Enter a password using the number keys, and then press [OK].
F Press [OK].
To program the SEP Code
A Press [Adv. Features], and then press [SUB Code].
B Press [Change] under RX SEP Code.
C Enter a SEP Code using the number keys, and then press [OK].
D To enter a password, press [Change] under Password (PWD).
E Enter a password using the number keys, and then press [OK].
F Press [OK].
To set the International TX Mode
A Press [Change] under International TX Mode.
B Select [Off] or [On], and then press [OK].
To select the fax header
A Press [Change] under Fax Header.
B Select [1st Name] or [2nd Name], and then press [OK].
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
