5802
[Free Run]
Performs a free run on the copier engine.
• The machine starts free run in the same condition as the sequence of A4/LT, A3 or
A4 SEF printing from the 1st or 2nd tray. Therefore, the correct paper should be
loaded in the 1st tray or 2nd tray, but paper is not fed.
• The main switch has to be turned off and on after using the free run mode for a
test.
001
B/W A4 LEF *ENG
-002 FC A4 LEF *ENG
003 FC A3 LEF *ENG
5807
[Area Selection]
Sets the machine destination.
001 - *ENG
[0 to 7/ 2:NA / -]
1: Japan
2: NA
3: EU
4: Taiwan
5: Asia
6: China
7: Korea
* The default value depends on the original
machine destination.
5810
[SC Reset]
Resets a type A service call condition.
• Turn the main switch off and on after resetting the SC code.
001 Fusing SC Reset *ENG
-
002 Hard High Temp.Detection *ENG
3. SP Mode Tables
292
To Next Page
Loading...
