069
Job Spooling (Protocol) *CTL
[ - / 0x7f : All Active / -]
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: sftp
bit7: wsprnd
Validates or invalidates the job spooling function for each protocol.
087 Protocol usage *CTL [0 or 1 / 0x00000000 / 1/step]
090
TELNET (0: OFF 1: ON) *CTL
[0 or 1 / 1 / 1/step]
0: Disable, 1: Enable
Enables or disables the Telnet protocol.
091
Web (0: OFF 1: ON) *CTL
[0 or 1 / 1 / 1/step]
0: Disable, 1: Enable
Enables or disables the Web operation.
145
Active IPv6 Link Local Address CTL [- / - / -]
This is the IPv6 local address link referenced on the Ethernet or wireless LAN (802.11b)
in the format:
"Link Local Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits each.
147
149
151
153
155
SettingActive IPv6 Stateless
Address 1~5
CTL [- / - / -]
These SPs are the IPv6 status addresses (1 to 5) referenced on the Ethernet or wireless
LAN (802.11b) in the format:
"Status Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits each.
Main SP Tables-5
329
To Next Page
Loading...
