005
Fixed USB Port *CTL
[0x00 to 0x02 / 0x00 / 1/step]
0x00: Disable
0x01: Enable (Level 1)
Device driver reinstallation is not required in the same machine.
0x02: Enable (Level 2)
Device driver reinstallation is not required in any machine.
006
PnP Model Name *CTL [20digits character / “Laser Printer” / -]
Displays PnP Model Name.
007
PnP Serial Number *CTL [12digits character / NULL / -]
Displays PnP Serial No.
008 Mac Supply Level *CTL
[0 or 1 / 1 / 1/step]
0: Disable, 1: Enable
100 Notify Unsupport *CTL
[0x00 or 0x01 / 0x01 / 1/step]
0x00: Function disabled
0x01: Function enabled
5845
[Delivery Server Setting]
Provides items for delivery server settings.
001
FTP Port No. *CTL [1 to 65535 / 3670 / 1/step]
Sets the FTP port number used when image files to the Scan Router Server.
002
IP Address (Primary) *CTL
[000.000.000.000 to
255.255.255.255 / - / 1/step]
Use this SP to set the Scan Router Server address. The IP address under the transfer tab
can be referenced by the initial system setting.
006
Delivery Error Display Time *CTL [0 to 999 / 300 / 1sec/step]
Use this setting to determine the length of time the prompt message is displayed when a
test error occurs during document transfer with the NetFile application and an external
device.
Main SP Tables-5
341
To Next Page
Loading...
