008
IP Address (Secondary) *CTL
[000.000.000.000 to
255.255.255.255 / - / 1/step]
Specifies the IP address assigned to the computer designated to function as the
secondary delivery server of Scan Router. This SP allows only the setting of the IP
address without reference to the DNS setting.
009
Delivery Server Model *CTL
[0 to 4/ 0 / 1/step]
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
Allows changing the model of the delivery server registered by the I/O device.
010
Delivery Svr. Capability *CTL [0 to 255 / - / 1 /step]
Changes the capability of the registered that the I/O device registered.
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to “0”)
011
Delivery Svr Capability (Ext) *CTL [0 to 255 / - / x2/step]
Changes the capability of the registered that the I/O device registered.
Bit7 = 1 Address book usage limitation (Limitation for each authorized user)
Bit6 = 1 RDH authorization link
Bit5 to 0: Not used
013
Server Scheme (Primary) DFU *CTL [ Up to 6 char / - / -]
This SP is used for the scan router program.
3. SP Mode Tables
342
To Next Page
Loading...
