2360 [Common:BW:Env.CorrectionTable]
001 Image Transfer:standard *ENG [1 to 100 / 20 / 1/step]
003 Image Transfer:low *ENG [1 to 100 / 53 / 1/step]
004 ImageTransfer:standard:Bk *ENG [1 to 100 / 20 / 1/step]
005 ImageTransfer:standard:C *ENG [1 to 100 / 20 / 1/step]
006 ImageTransfer:standard:M *ENG [1 to 100 / 20 / 1/step]
007 ImageTransfer:standard:Y *ENG [1 to 100 / 30 / 1/step]
012 Image Transfer:low:Bk *ENG [1 to 100 / 20 / 1/step]
013 Image Transfer:low:C *ENG [1 to 100 / 52 / 1/step]
014 Image Transfer:low:M *ENG [1 to 100 / 20 / 1/step]
015 Image Transfer:low:Y *ENG [1 to 100 / 30 / 1/step]
2401
[Plain1:Bias]
Adjusts the DC voltage of the discharge plate for plain 1 paper.
Standard: 260 mm/sec, Low: 85 mm/sec
001 Separation DC:standard:1side *ENG
[0 to 4000 / 0 / 10-V/step]
002 Separation DC:standard:2side *ENG
003 Separation DC:low:1side *ENG
004 Separation DC:low:2side *ENG
2403
[Plain1:Bias:BW]
Adjusts the current for the paper transfer roller for plain 1 paper in black-and-white mode.
001 PaperTransfer:standard:1side *ENG [0 to 200 / 25 / 1-uA/step]
002 PaperTransfer:standard:2side *ENG [0 to 200 / 25 / 1-uA/step]
003 PaperTransfer:low:1side *ENG
[0 to 200 / 18 / 1-uA/step]
004 PaperTransfer:low:2side *ENG
3. SP Mode Tables
98
To Next Page
Loading...
