003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2539
[Thick3:EnvCorrectionTable]
Adjusts the environment coefficient for each mode. When the environment is detected as
MM, SP2651 and SP2652 are multiplied by these SP values.
015 Separation DC:1side *ENG
[1 to 100 / 30 / 1/step]
016 Separation DC:2side *ENG
019 Separation DC:1side *ENG
020 Separation DC:2side *ENG
2541
[OHP:Bias]
Adjusts the DC voltage of the discharge plate for OHP.
003 Separation DC *ENG [0 to 4000 / 0 / 10-V/step]
2543
[OHP:Bias:BW]
Adjusts the current for the paper transfer roller for OHP in black-and-white mode.
003 PaperTransfer *ENG [0 to 200 / 13 / 1-uA/step]
2547
[OHP:Bias:FC]
Adjusts the current for the paper transfer roller for OHP in full color mode.
003 PaperTransfer *ENG [0 to 200 / 15 / 1-uA/step]
2551
[OHP:SizeCorrection:BW]
Adjusts the size correction coefficient for the paper transfer roller current for each paper
size. SP2543 and SP2547 are multiplied by these SP values.
003 PaperTransfer:S1 *ENG [100 to 995 /100 / 5%/step]
Main SP Tables-2
131
To Next Page
Loading...
