Main SP Tables-2
SM 5-119 D086/D087
System
Maintenance
017
Paper Transfer: Thick 1: 1st Side:
S5
*ENG
[100 to 600 / 180 / 5%/step]
148 mm > S5 size (Paper
width)
018
Paper Transfer: Thick 1: 2nd
Side: S5
*ENG
[100 to 600 / 180 / 5%/step]
148 mm > S5 size (Paper
width)
2871
[Special 3: Leading Edge Correction] Special 3 Paper: Leading Edge
Correction
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2852 and SP2857 are multiplied by these SP values.
Plain: High speed, 1200: Low speed
The paper leading edge area can be adjusted with SP2872.
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: 1200: 1st Side *ENG
2871
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2851 is multiplied by these SP values.
The paper leading edge area can be adjusted with SP2872.
005 Separation DC: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: 1200: 1st Side *ENG
To Next Page
Loading...
