Main SP Tables-3
D086/D087 5-132 SM
010
Consumption pattern: M *ENG
[0 to 255 / 5 / 1 time/step]
Specifies the belt mark generating time for checking the magenta toner density
when toner density is detected to be low at the toner density adjustment.
011
Consumption pattern: C *ENG
[0 to 255 / 5 / 1 time/step]
Specifies the belt mark generating time for checking the cyan toner density
when toner density is detected to be low at the toner density adjustment.
012
Consumption pattern: Y *ENG
[0 to 255 / 5 / 1 time/step]
Specifies the belt mark generating time for checking the yellow toner density
when toner density is detected to be low at the toner density adjustment.
013
T1 Bias: Bk *ENG
[0 to 80 / 22 / 1
A/step]
Adjusts the image transfer belt bias for Black.
014
T2 Bias: M *ENG
[0 to 80 / 25 / 1
A/step]
Adjusts the image transfer belt bias for Magenta.
015
T3 Bias: C *ENG
[0 to 80 / 22 / 1
A/step]
Adjusts the image transfer belt bias for Cyan.
016
T4 Bias: Y *ENG
[0 to 80 / 28 / 1
A/step]
Adjusts the image transfer belt bias for Yellow.
017
Developer Mixing Time *ENG
[0 to 250 / 10 / 1 sec/step]
Specifies the developer mixing time at the toner density adjustment.
To Next Page
Loading...
